32009X Front Axle Tapered Roller Bearing as one model of Single row tapered bearing, it can support radial and axial loads or pure thrust loads. Because the inner and outer races are separable, they are typically mounted in pairs in opposing directions to keep the bearings from falling apart. Any misalignment increases bearing noise and reduces bearing service life.
Contact Now
Front Axle Tapered Roller Bearing 1J0407625 is a double row tapered roller bearing. When double row tapered roller bearings are subjected to radial load, the outer ring is fixed and the inner ring rotates with the shaft. As the rollers are tapered, their contact line with the raceways of the inner and outer rings is a straight line, which can transmit the radial force to the rollers.
Contact Now
Front Axle Wheel Bearing 1H0407625 is a yikuN double row tapered roller bearing, which realizes force transmission and dispersion by rolling the tapered rollers between the raceways of the inner and outer rings. This kind of bearing can withstand radial load, unidirectional axial load and combined radial and axial load, and has the advantages of small coefficient of friction and strong load carrying capacity.The selection of its sealing structure and material also provides a guarantee for its application in different environments.
Contact Now
Wheel Hub Bearing Front Axle MR992425 is a bearing for MITSUBISHI vehicles. As a double-row tapered roller bearing, its operating principle is based on rolling friction. When the bearing is subjected to radial or axial loads, the tapered rollers roll between the raceways of the inner and outer rings, thus transmitting and distributing the forces.
Contact Now
40210-33P02 Tapered Roller Bearing is a kind of automobile wheel hub bearing, which is produced by high-performance materials. It can reduce the friction when the wheel rotates. It is suitable for the front and rear axles of the car and has good durability.
Contact Now
Taper Roller Bearing 09067/09195It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft09067/09195 Tapered Roller Bearings consist of a two piece cup and cone assembly, pre-lubricated with light oil ensuring that the product is ready for use upon delivery. The outer ring makes up the Cup, 09067, and the inner ring, rollers, and cage assembly make the Cone, 09195.
Contact Now
Rear Axle Hub Bearing MB664611 for MITSUBISHI is a double-row tapered roller bearing that can withstand radial loads as well as bi-directional axial loads.
Contact Now
As one of the most popular model, 3748.83 Tapered Roller Bearing mainly used in Peugeot, Citroen cars. Our company, Shandong Yiyuan Auto Spare Parts Co., Ltd., specializes in producing auto bearings. The bearing models we have can meet 95% car makes.
Contact Now
Front Axle Wheel Hub Bearing 09267-41001 is a double row tapered roller bearing, which has strong load carrying capacity, high rigidity and good stability, and can adapt to complex working conditions and heavy load working conditions.The inner diameter of this bearing is 41mm, the outer diameter 68mm, the width is 40 or 35mm, and it is suitable for SUZUKI models.Product SpecificationProduct nameWheel bearingOEM Number 43462-84A00Size41*68*40/35QualityHigh QualityWarranty12 monthsPackagingKDKD or Customer RequestThe effect of axial clearance on double row tapered roller bearings
Contact Now
JRM3938A/JRM3968XD Tapered Roller Bearing is a double-row tapered roller bearing, which is able to withstand larger radial and axial loads, making the car able to withstand greater loads and shocks, and at the same time ensuring the stable operation of the automobile transmission system and the wheel hubs, so as to improve the driving stability of the vehicle.Product SpecificationsProduct nameTapered roller bearingModelTimken JRM3938A/JRM3968XDSize38.1*68*37 mmQualityHigh QualityDelivery Time7-15 daysPackagingKDKD or Customer RequestProduct Advantage:1.
Contact Now
The 4432022 Front Axle Wheel Bearing Kit contains a double row tapered roller bearing, a dust cover and an oil seal.
Contact Now
Double Row Tapered Roller Bearing DU27520045/43, or DTRB for short, are a type of double row roller bearing with tapered raceways.
Contact Now
Front Axle Wheel Hub Bearing A21R23.3103145 is one of most popular model in Russian market.
Contact Now
Front Axle Wheel Hub Bearing 33205 is able to withstand large unidirectional axial loads, and in the radial direction, due to the contact between the rollers and the raceways, it also has good radial load carrying capacity. At the same time, the tapered design of the rollers makes the bearings better able to disperse stress and reduce damage to the bearings when they are subjected to shock loads, making them suitable for use in occasions where the working environment is more severe and the load varies greatly.Product DescriptionOE No.33205Reference No.VKBA1986713644010SET1003Inside Diamet
Contact Now
Taper roller bearing 17867 for OPELL45449/10 Tapered Roller Bearings consist of a two piece cup and cone assembly. The outer ring makes up the cup and the inner ring, rollers, and cage assembly make the cone. These parts of the bearing are detachable, the cone assembly is narrower in one end and the races are built with one side narrower as well to match the rollers.
Contact Now
Taper Roller Bearing HM 903249/10the Taper Roller Bearing HM 903249/10 is a precision-engineered component that offers durability, precision, compatibility, and versatility.
Contact Now
Front Hub Repair Kit 33104-3103800 contains two bearings, their OE numbers are: AA and BB. In addition, there is a dust cup.
Contact Now
Double Row Taper Roller Bearing 43210-0P016 as a wheel bearing, it is housed within the hub assembly, providing the static connection with the hub carrier through an outer ring or 'racer'.Product DescriptionBrandKDKD or as customer's requirementsManufacturer Part No.YKD-065Model43210-0P016Reference No.4T-CR1-0993Size43*73*45/41Car MakesNissan CedricDelivery Time1 to 7 days in case of stock10-25 days for production orderDeliveryby DHL/ FEDEX/ TNTby Air, by seaApplications: Role in the Railway transportation: Tapered roller bearings can withstand large radial and axial loads in railw
Contact Now
0750117772 Tapered Roller Wheel Bearing is produced with standard materials and undergoes strict inspection to ensure product quality. Bearings can reduce friction between rotating parts and improve transmission efficiency.
Contact Now
Taper Roller Bearing BCAB326332B for CitroenThe Tapered Roller Bearing, known as BCAB326332B-SKF SKF, has an inner diameter of 22 mm, an outer diameter of 41 mm and a thickness of 14.4 mm.In other types of roller bearings, varieties such as multi-row bearings, tapered rollers, cylindrical rollers, spherical rollers, multi-row or split are grouped together.Roller bearing is generally formed by cylindrical rollers, tapered rollers, single row rollers or double row rollers.Bearings facilitate the movement between a shaft and the parts attached to it.
Contact Now
Front Axle Shock Absorber A1-300/475.2905006 is a commonly used replacement shock absorber for MAZ, KAMAZ, two Russian car brands.
Contact Now
Front Axle Left Wheel Hub Bearing 93824579 is one of the better selling bearing repair kits for Iveco vehicles, it has an inner diameter of 40 mm, an outer diameter of 73 mm, a width of 55 mm and a weight of 1.4 kg.Product SpecificationProduct nameWheel bearingOEM Number 93824579 BTH1227Size40*73*55QualityHigh QualityWarranty12 monthsPackagingKDKD or Customer RequestBearing mounting:Cold mounting method is a method applicable to small bearing mounting, the specific operation method is as follows:When the inner ring of the bearing is a tight fit with the shaft and the outer ring is a loose
Contact Now
Taper Roller Bearing 639209 336501 for FiatThe 639209 is easy to (dis)assemble as it is a combination of a cup and a cone. The cone unit consists of an inner ring with cage and roller set. The cup is the outer ring. Single-row tapered roller bearings have an open design.
Contact Now
Taper Roller Bearing L68149/11 for KiaThe L68149/11 bearing consists of an inner cone (L68149) and an outer cup (L68111). These components are matched together as a set to ensure proper fitment and performance.Tapered Roller Design: Similar to other taper roller bearings, the L68149/11 features a tapered design where the rollers and raceways are arranged in a conical shape.
Contact Now