tensioner pulley-manufacture,factory,supplier from China

Tensioner Assembly 25281-2E300 as one model of tensioner, is usually used in HYUNDAI and KIA.

Tensioner Pulley Belt 536040010 is another type of bearing or wheel that applies tension to a belt or chain, helping keep the belt taught and preventing it from slipping or jumping off of other components. Product Parameters:Number of teeth: 132Width: 27mmColor: BlackMaterial: FiberglassTooth pitch: 9.5mmLength: 1257mmItem specifics:Brand:KDKDManufacturer Part NO.:KD-5002Delivery Time:15-20 DaysWarranty:1 Year or 50000 KMPort Of ShipmentNingbo Or Shanghai Port, ChinaPackage:Neutral or  KDKD box, Customized boxCar Model:DACIANISSANRENAULTReference OEM:16806-00Q0H    &nb

Tensioner Bearing 04897054AA as a belt tensioner, is a critical component of modern engines that maintains the proper tension in accessory drive belts.

Tensioner Bearing 14510-PE0-003 also has other OE numbers, such as 14510-PE0-004, 14510-PE0-005 etc.

The model of 536017710 is one kind of Tensioner Pulley Belt. It uses a spring loaded arm or a hydraulic actuator to apply the proper pressure and help keep the belt tensioned and aligned.

Tensioner Pulley Belt 536001610 is a small but crucial part of car's engine system.

Tensioner Bearing 978M6K254AD is often used in FORD and MAZDA. A tensioner bearing consists of a base, tensioner arm, spring, and pulley. It provides pressure to a timing belt that drives other pulleys while easing the strain on that belt.

Automotive Tensioner Bearing 4052-1308080 is actually a common bearing with a special structure, which is used to support the mechanical rotating body and reduce the friction coefficient during movement. Especially in areas where belts are needed, such as automobiles, industrial machinery, agricultural machinery, etc., the application is very extensive.

Tensioner Bearing 7438670484 as a model of tensioner, is applicable to Renault and Volvo. The tensioner provides tension to the belt, which drives from the crankshaft to the camshaft, alternator, air compressor, power steering pump, and water pump.

Tensioner Assembly 25192084 mainly used for CHEVROLET, OPEL and VAUXHALL. A tensioner is a device that applies a force to create or maintain tension.

Timing Belt VAG Audi SEAT Skoda Volkswagen 536035610 is one model of Tensioner Pulley Belt. The tensioner pulley is located at one end of the belt and works by transferring the force from a hydraulic piston or spring and applying it to the system, keeping the belt/chain tight and avoiding components coming loose and causing damage to the system. Product Parameters:Number of teeth: 160Width: 25mmLength: 1524mmTooth pitch: 9.525mmWeight: 0.2kgItem specifics:Brand:KDKDManufacturer Part NO.:KD-5001Delivery Time:15-20 DaysWarranty:1 Year or 50000 KMPort Of ShipmentNingbo Or Shanghai

Tensioner Assembly 96966707 is usually used in Chevrolet and Daewoo.Product Parameters:Bearing Bore Inside Diameter 1 (MM): 17Contact Surface: Smooth/BacksideGroove Quantity: 0Material: ThermoplasticNumber of Pulleys: 1Outside Diameter (MM): 76Pulley 1 Flanged: NoItem specifics:Brand:KDKDManufacturer Part NO.:KD-4002Delivery time:15-20 daysWarranty:1 Year or 50000 KMPackage:Neutral or KDKD box,Customized box.Port of shipment:Ningbo or Shanghai Port, ChinaModel:GENERAL MOTORSCHEVROLETDAEWOOReference OEM:96966707          9634997696183115       

Tensioner Bearing 9400829969 mainly use for Peugeot, Citroen and Fiat. A tensioner bearing must handle high temperatures, high-speed rotation, and belt vibration because of contiguity in the engine to make the direction of a belt change. Product Parameters:Outer diameter: 61.8mmDiameter: 61.5mmInner diameter: 49mmWidth: 29mmHeight 1: 29mmHeight 2: 37.5mmItem specifics:Brand:KDKDManufacturer Part NO.:KD-3004Delivery Time:15-20 DaysWarranty:1 Year or 50000 KMPort Of ShipmentNingbo Or Shanghai Port, ChinaPackage:Neutral or KDKD box, Customized boxCar Model:PeugeotCitroenFiatReferen

6203-2 RS for Automotive Tensioner  PulleyThe "6203-2RS" designation signifies the bearing's series and sealing configuration. "6203" indicates the series of deep groove ball bearings, while "2RS" denotes the bearing has two rubber seals. These rubber seals are critical for automotive applications as they provide effective sealing against contaminants, such as dust, dirt, and moisture, which are commonly encountered in engine compartments.The 6203-2RS bearing typically has a bore diameter of 17 mm, an outer diameter of 40 mm, and a width of 12 mm.

Tensioner Assembly 8200277606 For Renault has many other OE numbers, such as 7700102872, 8200403954, 8200603359, 11925-00QAA etc. Product Parameters:Outer diameter: 60mmWidth: 25mmTravel wheel material: PlasticCover material: AluminumWeight: 0.556kgDrive type: AutomaticMaterial: Cast AluminumItem specifics:Brand:KDKDManufacturer part No.:KD-4003Delivery time:15-20 daysWarranty:1 Year or 50000 KMShipment port:Ningbo or Shanghai port, ChinaPackage:Neutral or KDKD box, Customized boxModel:RenaultNissanReference OEM:8200277606        7700102872      &nb

Auto Tensioner Pulley Bearing 058903133C is a device used in the drivetrain of Audi and Volkswagen cars, the main function of which is to regulate and maintain the tension of the drive belt or chain.Product DescriptionOE No.058903133CReference No.058903133D58903133GA357.05T38151Outer Diameter73 mmInner Diameter17 mmHeight21.3 mmWeight0.836kgCar makesAUDI VWWarranty12 monthsPrinciple of operationIn the transmission system, when the belt or chain slackens due to long time use, or when the tension changes due to temperature changes and other factors, the tensioner pulley can be adjusted by its ow

The belt of Tensioner Pulley Bearing and Belt VKMA08501 is made of rubber material, which has less friction between rubber and metal compared to metal timing chain, and produces relatively low noise during engine operation.Product DescriptionOE No.K015586XSReference No.KTB956530045609VKMA08501Belt Length1760mmBelt width28mmNumber of belt teeth220Weight1kgCar MakesCHRYSLER JEEP SAIC MAXUSWarranty90000kmMOQ10 PCSQualityHigh QualityHow do I know if I need to replace my timing belt?1.

Tensioner Assembly 25281-4A000 is a tensioner model that can be adapted to HYUNDAI and KIA. As the hydraulic pressure increases, the tensioner in each stud is the same, and the flange comes together simultaneously and evenly.

As a hot selling double row tapered roller bearing model, Double row tapered roller bearing DU255500535 is produced by using high quality materials and after strict production process and proofreading.

Cylindrical Roller Bearing NUP307ENV has a single row arrangement of rolling elements and is a radial thrust rolling bearing with tapered rollers.

DU25520037 Double Row Tapered Roller Bearing, through its internal rolling bodies (tapered rollers) rolling between the inner and outer races, thus reducing friction and wear, enabling the wheels to rotate smoothly and flexibly.

Product description:Double row taper roller bearings are specialized bearings that consist of two rows of tapered roller elements arranged in a double-row configuration. These bearings are designed to handle both radial and axial loads by distributing the load between the two rows of tapered rollers. In summary, double row taper roller bearings are specialized bearings designed to handle both radial and axial loads efficiently.

 B-1110 Needle Roller Bearing is one of Shell Type Needle Roller Bearings. The outer ring of Shell Type Needle Roller Bearings cannot avoid deformation by heat treatment due to their thin cross sections. It is not appropriate to take a direct measurement on the outer ring. Use Standard Mounting Dimensions shown for shaft and housing diameters. Tolerance of outer ring Width is +0 to -0.20 mm.Our specifications of Superior Quality Needle Roller Bearings :High quality and good serviceLess coefficient of frictionCompetitive priceVariations of structure :A.

Taper Roller Bearing 11590/20 for LAND ROVERThe Tapered Roller Bearing, known as 11590-11520 Generic, has an inner diameter of 15.88 mm, an outer diameter of 42.86 mm and a thickness of 14.29 mm.Single row tapered roller bearings, inch sizes, are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance.