Cast Iron UCP204-12 Pillow Block Bearing

Our Cast Iron UCP204-12 Pillow Block Bearing provides key performance benefits such as high load capacities, high speeds, and design compatibility. In contaminated environments, the roller bearings push particulates out of the way or roll seamlessly over them. Large rollers in the Roller Pillow Block system are well suited for long travel applications, minimizing vibration and providing smooth and quiet travel over joined shafts.

Parameter

Solid-Base Mounted Bearing

This ready-to-mount unit has solid base cast iron housing which is manufactured without cavities and fillers, helping eliminate material build-up from under the bearing. Whereas, a hollow base is susceptible to build-up that can trap moisture and therefor cause corrosion to the cast iron housing. Jeremywell pillow block bearing's only come with a solid base, making them a lot stronger and easier to maintain than a hollow base.

Self-Alignment Feature

If the bearing is crooked for example when you lay it on a flat table, it is not flat. Please don't worry. This is our self-alignment feature.  These bearing are meant to have some play in them. When you 

mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct their own alignment once they begin to rotate. Because if the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. So our self-alignment feature is a way to prevent this from happening.