31604-1601180 Clutch Bearing for Russian Cars

31604-1601180 Clutch Bearing for Russian Cars, this is one of our company's best-selling clutch bearings in the Russian market. We use high-quality materials for the production, and the production process is in strict compliance with the standards, so this clutch bearing ensures a smoother clutch engagement, reduces wear during operation, and thus extends the service life of the clutch and the entire transmission system.

Product Description

Can I replace the clutch bearing myself? What do I need to do?

Yes, an individual can also perform a clutch bearing replacement. The following is a general clutch bearing replacement procedure, but please note that it may need to be adapted to the specific situation in practice:

1. Preparation

→Disconnect the power and water supply.

→Prepare tools and spare parts

→Make sure that the work area is well ventilated and that safety equipment is worn.

2. Removing the old bearing

→Remove the housing or covering of the equipment to expose the clutch parts

→Find the exact location of the clutch bearing

→ Remove the fixing screws, taking care to record the position and sequence of each screw for subsequent installation

→Remove the old bearing, taking care to avoid damaging other parts.

3. Installing the new bearing

→First clean the inside of the clutch assembly of dust and dirt, and check other relevant parts for damage or wear.

→ Apply an appropriate amount of grease to the contact surfaces of the clutch bearing to ensure that it works smoothly

→ Install the new bearing, ensuring that it is correctly aligned with the relevant parts and securely fastened.

→ Tighten the fixing screws one by one using a tool such as a spanner according to the previously recorded position and sequence. Take care to follow the principle of diagonal tightening to maintain the balance and stability of the clutch.

4. Testing and verification

→ Put the housing or cover of the equipment back in place.

→Re-connect the power supply and water source and check that the equipment operates normally.

→Start the unit and perform the necessary tests to verify that the clutch bearing has been successfully replaced and that the unit is working properly.